High Temperature Resistance Cold Drawn 5132 SCR430 (H) 1.7033 34cr4 35cr Square Flat Hexagonal Steel Rod Bar

Model NO.
5132 SCr430(H) 1.7033 34Cr4 35Cr
Special Use
High-strength Steel Plate, Wear Resistant Steel, Silicon Steel, Cold Heading Steel, Free Cutting Steel, Mold Steel
Application
Wear-Resistant Steel, Cold Heading Steel, Free-Cut
Transport Package
Standard Seaworthy Export Packaging or as Required
Specification
3000-9000mm
Trademark
meide
Origin
Shandong, China
HS Code
7215500000
Production Capacity
1000 Ton/Month
Reference Price
$ 486.00 - 688.50
Contact Us

Product Description

High Temperature Resistance Cold Drawn 5132 SCR430 (H) 1.7033 34cr4 35cr Square Flat Hexagonal Steel Rod Bar
About products
35Cr, alloy structural steel, and 30Cr steel belong to medium carbon alloy quenched and tempered steel with high strength and toughness. The strength limit is 20% higher than the corresponding grade of 35 steel, and the hardenability is slightly higher than 30Cr. Other process properties are similar to those of 30Cr.
chemical composition
 
component C Si Mn P S Cr Ni Cu Mo
minimum value 0.32 0.17 0.5 - - 0.8 - - -
Maximum value 0.39 0.37 0.8 0.035 0.035 1.1 0.3 0.3 0.15
Approximate comparison table
GB ISC CNS JIS KS ASTM/AISI UNS ISO DIN EN/DIN W-Nr.
35Cr A20352 SCr435 SCr435
SCr435H 		SCr435 5135 G51350 34Cr4 34Cr4 1.7033

 

Product Description
Commodity
Cold Drawing / Drawn Flat/ Square / Rectangular / Rectangle / Hexagonal / Special Shape Rods Bars
Grades
Carbon steel
SAE 1018 , A36, SS400, S235JR, Q235, SAE 1020, S20C , 1.0402, 20GB, CK22,  
SAE 1045 ,S45C, C45, CK45, EN8 ,1.1191
Alloy steel
SAE 5120 , 20Cr, Scr 420H, 20Cr4, SAE 5140 , 40Cr,SCr440, 520M40,  
SAE 4130 , 30CrMo, SCM430, SCM420, SAE 4140 , 42CrMo4, EN19, SCM440,  
708A42, 708M40, SAE 4340, 40CrNiMoA,871M40 , SNCM439
Specification
Round Bar
5mm to 100mm
Square bar
5*5mm to 120*120mm
Flat bar
5*20mm to 20*100mm
hex bar
5mm to 120mm
hexagonal bar
5mm to 120mm (side to side)
Tolerance
Class H11
Length
4-12m random length or as per request fixed length
Surface
Bright, or dark as per required
Packing
Wrapped by plastic clothes and steel strips
Delivery Condition
BK, BKW, GBK, NBK
Container
Size
20ft GP:5898mm(Length)x2352mm(Width)x2393mm(High)
40ft GP:12032mm(Length)x2352mm(Width)x2393mm(High)
40ft HC:12032mm(Length)x2352mm(Width)x2698mm(High)
Application
hardware tools, auto parts, standard parts, fasteners common shaft, machinery manufacturing, light industry, hardware, bicycles,
cars, motorcycles, textile machinery, transformers and other machinery industry.
Advantages
greater size accuracy, straightness and increased tensile and yield strength as well as improved machinability
MOQ
1 tons
High Temperature Resistance Cold Drawn 5132 SCR430 (H) 1.7033 34cr4 35cr Square Flat Hexagonal Steel Rod Bar

High Temperature Resistance Cold Drawn 5132 SCR430 (H) 1.7033 34cr4 35cr Square Flat Hexagonal Steel Rod Bar
Theoretical weight table of square steel
Side length (mm) Cross sectional area (cm2) Theoretical weight (kg/m) Side length (mm) Cross sectional area (cm2) Theoretical weight (kg/m)
5mm 0.25 0.196 30mm 9.00 7.06
6mm 0.36 0.283 32mm 10.24 8.04
7mm 0.49 0.385 34mm 11.56 9.07
8mm 0.64 0.502 36mm 12.96 10.17
9mm 0.81 0.636 38mm 14.44 11.24
10mm 1.00 0.785 40mm 16.00 12.56
11mm 1.21 0.95 42mm 17.64 13.85
12mm 1.44 1.13 45mm 20.25 15.90
13mm 1.69 1.33 48mm 23.04 18.09
14mm 1.96 1.54 50mm 25.00 19.63
15mm 2.25 1.77 53mm 28.09 22.05
16mm 2.56 2.01 56mm 31.36 24.61
17mm 2.89 2.27 60mm 36.00 28.26
18mm 3.24 2.54 63mm 39.69 31.16
19mm 3.61 2.82 65mm 42.25 33.17
20mm 4.00 3.14 70mm 49.00 38.49
21mm 4.41 3.46 75mm 56.25 44.16
22mm 4.84 3.80 80mm 64.00 50.24
24mm 5.76 4.52 85mm 72.25 56.72
25mm 6.25 4.91 90mm 81.00 63.59
26mm 6.76 5.30 95mm 90.25 70.85
28mm 7.84 6.15 100mm 100.00 78.50
High Temperature Resistance Cold Drawn 5132 SCR430 (H) 1.7033 34cr4 35cr Square Flat Hexagonal Steel Rod Bar
mechanical behavior
Sample diameter
 d
 mm 		Heat treatment or condition tensile strength
σb
Mpa 		Yield point
σs
Mpa 		Elongation
δ
% 		Reduction of area
ψ
% 		hardnessHBW Impact absorbed energy
KV2
J
d=25 Quenching+tempering ≥930 ≥735 ≥11 ≥45 ≤207 ≥47
1.Allowable adjustment range of heat treatment temperature: quenching ± 15 ° C, low temperature tempering ± 20 ° C, high temperature tempering ± 50 ° C  
2. The mechanical properties listed in the table are applicable to the steel with the section size not g reater than 80mm. For steels larger than 80 to 100mm, the elongation after fracture, reduction of area and impact absorption energy are allowed to decrease by 1% (absolute value), 5% (absolute value) and 5% respectively compared with those specified in
the table; For steel with a size greater than 100 to 150 mm, the elongation after fracture, reduction of area and impact
absorption energy are allowed to decrease by 2% (absolute value), 10% (absolute value) and 10% respectively compared with those specified in the table; For steel with a size greater than 150 to 250mm, the elongation after fracture, reduction of area and impact absorption energy are allowed to be reduced by 3% (absolute value), 15% (absolute value) and 15% respectively compared with those specified in the table; 
3.Boron steel can be normalized before quenching, and the normalizing temperature shall not be higher than its quenching temperature. The first quenching of chrome manganese titanium steel can be replaced by normalizing  
4.No yield ca n be found on the sample steel during tensile test, and no yield point can be measured σ Under the condition of s, the specified residual elongation stress can be measured σ< sub> τ 0.2 
5.The hardness in the table is the value of Brinell hardness HB10/300 0 of steel in annealing or high temperature tempering supply state 
Heat treatment: quenching temperature 860 ° C oil cooling; Tempering temperature 500 ° C Water cooled, oil cooled

High Temperature Resistance Cold Drawn 5132 SCR430 (H) 1.7033 34cr4 35cr Square Flat Hexagonal Steel Rod Bar High Temperature Resistance Cold Drawn 5132 SCR430 (H) 1.7033 34cr4 35cr Square Flat Hexagonal Steel Rod Bar It has high strength and toughness, its strength is higher than that of 35 steel, its mechanical properties are basically similar to that of 30Cr, and its hardenability is slightly higher than that of 30Cr. It is usually used in the quenched and tempered state or after normalizing. It is used to manufacture important parts that work under wear and friction conditions or great impact loads, such as shafts, small shafts, balance levers, rocker bars, connecting rods, bolts, nuts, gears and various rollers.

High Temperature Resistance Cold Drawn 5132 SCR430 (H) 1.7033 34cr4 35cr Square Flat Hexagonal Steel Rod Bar High Temperature Resistance Cold Drawn 5132 SCR430 (H) 1.7033 34cr4 35cr Square Flat Hexagonal Steel Rod Bar High Temperature Resistance Cold Drawn 5132 SCR430 (H) 1.7033 34cr4 35cr Square Flat Hexagonal Steel Rod Bar

High Temperature Resistance Cold Drawn 5132 SCR430 (H) 1.7033 34cr4 35cr Square Flat Hexagonal Steel Rod Bar High Temperature Resistance Cold Drawn 5132 SCR430 (H) 1.7033 34cr4 35cr Square Flat Hexagonal Steel Rod Bar High Temperature Resistance Cold Drawn 5132 SCR430 (H) 1.7033 34cr4 35cr Square Flat Hexagonal Steel Rod Bar

Packaging 		1. by bundles, each bundle weight under 3 tons, for small outer diameter steel bars, each bundle with 4 - 8 steel strips.
2. after making by bundle, covered with Polyethylene waterproof cloth.
3. make black paints painting on each bar, then make bundles
20 feet container contains dimension Length under 6000mm
40 feet container contains dimension Length under 12000mm
By bulk vessel Freight charge is low by bulk cargo, and large heavy sizes can not be loaded into containers can shipping by bulk cargo


High Temperature Resistance Cold Drawn 5132 SCR430 (H) 1.7033 34cr4 35cr Square Flat Hexagonal Steel Rod Bar
FAQ

1. Who are we?
Our headquarter is located in Shandong, China. Since 2023, we have sold to North America (60.00%), Western Europe (14.00%) and South America (6.00%). There are about 11-50 people in our office.

2. How do we guarantee quality?
Always provide pre-production samples before mass production;
Always carry out final inspection before shipment;

3. What can you buy from us?
Copper, aluminum, die steel, titanium, customized machine parts
4. Why should you buy from us instead of other suppliers?
The company has 25 years of production experience. It has advanced precision production equipment, modern large warehouse, 200000 tons of inventory goods and a number of long-term stable cooperative customers.

5. What services can we provide?
Accepted delivery conditions: FOB, CFR, CIF, EXW
Accepted payment currency: US dollar, Euro, Japanese yen, Canadian dollar, Australian dollar, Hong Kong dollar, British pound, RMB, Swiss franc;
Accepted payment type: T/T, L/C, D/P D/A, PayPal;
Optional ports: Tianjin, Shanghai, Guangzhou;
Spoken: English, Chinese

6. How can we get your price?
A. We need the following information to quote for you:
1).  Product Name
2).  standard
3).  Material grade (chemical composition)
4).  dimension
5).  amount
6).  Special part drawin

 

 

Alloy Steel

PNEUTEC.IT, 2023